NuStreams-900provides various interfaces, such as 100/50/40/25/10/5/2.5G Ethernet, Gigabit Ethernet, 100/10Mbps Ethernet for different testing requirements. Also, all slots of NuStreams-900support hot-swapping. Therefore, swapping or changing test modules can be doneeasily without powering off NuStreams-900.

There is anoptional module - CKM, it has GPS chip for clock synchronization betweenchassis and chassis, so NuStreams-900 can measure the latency between differentplaces.

To provide asafe and reliable testing environment, NuStreams-900 has sensors embeddedinside. Vital system information such as system temperature, rotation speed ofthe fans and system voltage can be picked up by these embedded sensors. Thisinformation can be read and interpreted by the web service running on managementcard, and the management card will alarm users when system failures occur. Furthermore, NuStreams-900 has new mechanism design, it’s more convenient to replace the cooling fan, soNuStreams-900 became easier to maintain.

With cards of different types installed, NuStreams-900chassis can perform multiple,different testssimultaneously to ensurethe test precision. As the result, the time consumed for all DUTs’ multi-tasktesting will be shortened dramatically.

●  Intuitiveutility software for monitoring system temperature and the fan speed

● All slotssupport hot-swapping

● Performing synchronizedtests between chassis

● Supporting multi-user mode, namely multiuser usingthe chassis and cards installed simultaneously

● Utilitysoftwares provided by Xtramus Technologies which can analyze the test resultsand DUT performance with intuitive GUI interface.

● Cards supporting different Ethernet transferring rate, from 10M to 100G

● Simpleand easy-to-understand system status LEDs

● Replaceablefan tray

● Utility softwares that complied with RFC-2544, RFC-2889 and RFC-3918.