 |
As ideal testbeds for researching and developing network product or quality control in mass-production scale, Xtramus NuStreams-900 chassis provide a flexible, reliable, and high-precision solution in network communication device testing. |
NuStreams-900 provides various interfaces, such as 100/50/40/25/10/5/2.5G Ethernet, Gigabit Ethernet, 100/10Mbps Ethernet for different testing requirements. Also, all slots of NuStreams-900 support hot-swapping. Therefore, swapping or changing test modules can be done easily without powering off NuStreams-900.
There is anoptional module - CKM, it has GPS chip for clock synchronization between chassis and chassis, so NuStreams-900 can measure the latency between different places.
To provide a safe and reliable testing environment, NuStreams-900 has sensors embedded inside. Vital system information such as system temperature, rotation speed ofthe fans and system voltage can be picked up by these embedded sensors. This information can be read and interpreted by the web service running on management card, and the management card will alarm users when system failures occur. Furthermore, NuStreams-900 has new mechanism design, it’s more convenient to replace the cooling fan, soNuStreams-900 became easier to maintain.
With cards of different types installed, NuStreams-900 chassis can perform multiple, different tests simultaneously to ensurethe test precision. As the result, the time consumed for all DUTs’ multi-tasktesting will be shortened dramatically.
? Supports cascading (up to 3 chassis)
? Intuitive utility software for monitoring system temperature and the fan speed
? Performing synchronized tests between chassis
? Supporting multi-user mode, namely multiuser using the chassis and cards installed simultaneously
? Utility softwares provided by Xtramus Technologies which can analyze the test results and DUT performance with intuitive GUI interface.
? Cards supporting different Ethernet transferring rate, from 10M to 100G
? Simple and easy-to-understand system status LEDs
? Replaceable fan tray
? Utility softwares that complied with RFC-2544, RFC-2889 and RFC-3918.
NuStreams-900 | |||
Slot | 8 slots for installing test modules 1 slot for installing management module 1 slot for installing CKM module (optional) | ||
Dimension | 22.3 cm (W) * 25.9 cm (D) * 18.6 cm (H) | ||
Net Weight | Approx. 4.8kg | ||
Power Module | NS-90PW-500 | ||
Power Jack: Male IEC 320 Receptacle | Input Power: AC 90V ~ 240V, 50Hz ~ 60Hz | ||
Maximum Power Output | 500 Watt | ||
Temperature | · Operating: -10°C~ 50°C (14°F~ 122°F) | · Storage: -10°C~ 50°C (14°F~ 122°F) | |
Humidity | · Operating: 0% ~ 85% RH | · Storage: 0? ~ 85% RH | |
Supported Cards | Lord series and XM-RM series modules | ||
MGM-3s3A | Ports: · Console Port: RJ45 console port of 115200 baud rate for debugging · WiFi Port: Install WiFi module · USB Port: Connect external USB storage device to upgrade the chassis and modules · Mgm Port: 10/100/1000M Mbps RJ45 x 2 for management | ||
LEDs: · PWR: power status · SYS: system status · WiFi LED: displays the status of the WiFi module · USB LED: displays the status of the USB Port · Speed: link speed of management port · L/A: display the link status between PC and NuStreams-900 | |||
Button: · R2d: Restore all settings to default. | |||
CKM (optional) | For clock synchronization between chassis. | ||
Built-in Sensors | Detecting system temperatures, rotation speed of fans, and system voltage. | ||
FAN Module | NS-90FAN-U2(Top), NS-90FAN-L4(Bottom) | ||
Note* 1. MGM-3s3A is shipped with NuStreams-900. 2. CKM is optional. | |||
| Application | NuApps-2544-RM | v1.3b011 |  |
| NuApps-2889-RM | v1.1b013 | |
|
| NuApps-MFG | v1.0b006 | |
|
| NuApps-MultiUnits-RM | v1.1b083 | |
|
| NuWIN-RM | v2.0b051 | |
|
| Product Brief | PBF_NuStreams-900_V1.3_CHS | v1.3 | |
| PBF_NuStreams-900_V1.3_ENG | v1.3 | |
|
| Support Application | Xtramus-upgrade-eu | v1.1b001 | |
| User Manual | USM_NuStreams-900_V1.2_ENG | v1.2 | |
